Step 1: Slide the top of the first panel

             between the top rail and

             the first picket.

 

Step 2: Slide the bottom of the first panel

             between the bottom rail and

             the first picket.

 

Step 3:Flattend the panel against the

             picket.

 

Step 4: Continue the process until all panels       

             are installed, aligning each panel together.

 

Step 5: Apply double-sided tape or 3M-90 spray adhesive (not included) as needed to each panel and press firmly to the picket.

​

Note: Prior to installation, please do not rest panels in direct heat for an extended period of time. Also, due to natural conditions, periodic adjustments may be needed to reset panels. 

​

*Please check your local department store for double-sided tape or 3M-90 spray adhesive*